Xerox 700 Digital Color Press - Replacing the Waste Toner Container

User Guide 7-21
Xerox 700 Digital Color Press
Maintenance
Return the R1-R4 handle to the original position and close
the front door.
Push in the Drum Drawer completely. Return the Release
Handle to its original position.
Insert the used charge corotron into an empty container
for recycling.
That completes the procedure for replacing the Charge
Corotron.
Grasp the amber-gold colored casings on the new charge
corotron and pull towards the front of the machine until
you hear a clicking noise to indicate the charge corotron is
in place.
This procedure shows you how to remove the used Waste
Toner Container and replace it with a new Waste Toner
Container. The machine will tell you when you need to
order a new Container and when to install it.
Make sure the machine has stopped running, and open
the Front Door.
Open the waste toner container cover, located to the right
of the Area #2 lever.
Replacin
g
the Waste Toner Container
1.
2.
9.
10.
11.
12.
Downloaded From ManualsPrinter.com Manuals