EasyManuals Logo

Xerox 700 Digital Color Press User Manual

Xerox 700 Digital Color Press
216 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #154 background imageLoading...
Page #154 background image
8-20 User Guide
Problem Solvin
g
Xerox 700 Di
g
ital Color Press
8.5" x 11"
Note
Bypass Tray (Tray 5) Jam or Misfeed Prevention
1. Bypass Tray (Tray 5) Jams occur in the paper path
clearance areas. The machine will display a message
indicating the clearance area.
For more information on removing paper jams from
these areas go to the topic titled Jam Clearance within
this chapter.
If after clearing the jam, the Tray 5 feeder jams or
misfeeds again follow the steps on the following pages.
2.
Fan the paper and load into the bypass tray. Ensure that
the paper does not cover the maximum fill line.
3.
Ensure that the Bypass Tray guides are against the edges
of the loaded paper.
Do not add paper to the tray when paper is already
loaded. Instead, remove the paper and combine the
additional paper with the paper from the tray and reload.
4.
Check that the Bypass Tray paper attributes are set
correctly.
Check that the paper is within specification.
Downloaded From ManualsPrinter.com Manuals

Table of Contents

Other manuals for Xerox 700 Digital Color Press

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox 700 Digital Color Press and is the answer not in the manual?

Xerox 700 Digital Color Press Specifications

General IconGeneral
BrandXerox
Model700 Digital Color Press
CategoryAll in One Printer
LanguageEnglish

Related product manuals