Xerox 700 Digital Color Press - Page 180

8-46 User Guide
Problem Solvin
g
Xerox 700 Di
g
ital Color Press
Completely Black
Output is totally black
or gray over the entire
paper.
The fault requires further investigation. Contact the Xerox Welcome and Support Center
(go to www.xerox.com
and click on the Contact Us link for specific contact
information/telephone numbers in your area).
Before calling the Welcome and Support Center, write down your machine's serial number.
Completely Blank
Paper is delivered by
the machine, but no
image is present.
If you are copying your original from the Document Handler, ensure that your original is
loaded face up and the document handler guides are against the edges of the loaded
originals.
If you are copying your original from the Document Glass, ensure that your original is
loaded face down and to the rear left of the document glass.
Ensure that the paper loaded is within machine specifications. Go to the Paper and Media
section for information on paper specifications and storage.
Load a new ream of paper into the selected paper tray.
White Lines, Streaks,
Spots, Bands or
Deletions
Output contains white
stripes either dotted or
continuous, has
stratches or areas of
white where the
original was a dark
image.
Corrective ActionProblem
Downloaded From ManualsPrinter.com Manuals