Xerox 700 Digital Color Press - Page 29

User Guide 3-9
PaperXerox 700 Digital Color Press
Cancel
Tray 1
Confirm
Change Settings
8.5 in.x11 in.
Plain
Heavyweight
White
Off
Default
Off
Default
Paper Size
Close
Image Enhancement
Items
Current Settings
Tray 1
Auto Size Detect
Paper Type/Paper Weight
White
Plain
Adjust Paper Decurler
Alignment Adjustment
Background Suppression:
Paper Color
4
6
5
The Paper Type/Paper Weight options allow you to select
the paper type (Heavyweight, Transparency, Tabs, Hole
Punched, etc.) from a list of available paper types.
The Paper Size options allow you to specify the size of the
paper you load into the paper tray.
The Auto Size Detect option allows standard sized paper
loaded in the trays to be automatically detected by the
machine.
If enabled by your System Administrator, the Paper Tray settings
screen may be displayed on the touch screen.
Select the Change Settings button if changes have been
made to the paper tray; otherwise, press Confirm.
8
7
9
To position the front and rear guides, squeeze the clamp
mechanism and slide the guide to touch the edge of the
stock.
To position the right side guide, squeeze the clamp
mechanism and slide the guide to touch the edge of the
stock.
Move the front and rear guides to just touch the edges of the
stack. The paper guides in the trays must be adjusted so that
they touch the stock.
Downloaded From ManualsPrinter.com Manuals