Xerox 700 Digital Color Press - Page 32

User Guide3-12
Paper
Xerox 700 Di
g
ital Color Press
Off
Default
Off
Default
Paper Size
Close
Image Enhancement
Items
Current Settings
Tray 5
Auto Size Detect
Paper Type/Paper Weight
White
Plain
Adjust Paper Decurler
Alignment Adjustment
Background Suppression:
Paper Color
Cancel
Tray 5
Confirm
Change Settings
8.5 in.x11 in.
Plain
Heavyweight
White
Select the Save button to continue.
The Adjust Paper Decurler feature allows you to set the
decurler values to the following:
Default•
Type A•
Type B•
Type C•
Select the Change Settings button if changes have been made
to the paper tray; otherwise, press Confirm.
The Paper Type/Paper Weight options allow you to select the
paper type (Heavyweight, Transparency, Tabs, Hole Punched,
etc.) from a list of available paper types.
The Paper Size options allow you to specify the size of the
paper you load into the paper tray.
If paper curl is a problem, using one of the preset Decurler Paper Type A-C Profile Settings usually eliminates the
problem. These profile settings cover a broad range of paper variables, image coverage, and environmental
factors.
If the System Default setting is not correcting curl, then you can use one of the Decurler Paper Type A - C settings.
For example:
If the System Default is not correcting curl, select Decurler Paper Type A.•
If Decurler Paper Type A is not correcting curl, select Decurler Paper Type B.•
If Decurler Paper Type B is not correcting curl, select Decurler Paper Type C.•
Downloaded From ManualsPrinter.com Manuals