Xerox 700 Digital Color Press - Page 91

User Guide 4-49
Copy
Xerox 700 Di
g
ital Color Press
Quantity
Copy
Originals
Black
94%
Collated
0 / 1
1
Change
Settings
Cancel
Start
Change
Quantity...
Chapter
Start...
Insert
Separators...
Sample Set
Next Original
Last Original
Quantity
Copy
Originals
Black
94%
Collated
0 / 1
1
Change
Settings
Cancel
Start
Change
Quantity...
Chapter
Start...
Insert
Separators...
Sample Set
Next Original
Last Original
Services Job Status Machine Status
Log In/Out
Language
Start
Interrupt
Stop
Dial Pause
Energy Saver
Clear All
Program the job requirements for the first segment of the
j
ob. Load only the first segment into the document
handler or place the segment on the glass one page at a
time. Press the Start button on the keypad.
When the first segment has finished scanning, the Copy
Status screen will appear. Remove the originals and press
the Change Settings button. Program the job
requirements for the second segment of the job. Load the
second segment into the document handler or on the
document glass and press the Start button on the control
panel. Repeat these steps until all segments of your job
have been programed and scanned.
After the last segment has been scanned, touch the Last
Original button on the touch screen to end the build job.
Select the Last Original button to continue.
The machine will complete the quantity selected.
You have completed the description of Build Job.
Downloaded From ManualsPrinter.com Manuals