3 Copy
102
Copy
3
Off
In the screen displayed during scanning documents with the document feeder with
specifying Collated, [Last Original] is selected.
On
In the screen displayed during scanning documents with the document feeder with
specifying Collated, [Next Original] is selected.
[Copy Job] screen
The [Copy Job] screen is displayed when copying begins.
Last Original
Select this to end scanning documents.
Next Original
Select this when you have more documents to copy. This button is activated when the
[Combine Original Sets] feature is used.
Cancel
The document data stored by [Combine Original Sets] is cleared and the copy job is
cancelled.
Note • The same operation is performed if you press the <C> button or <Clear All> button on the
control panel.
Start
Load the next document, and select [Start] to start scanning.
Note • The same operation is performed if you press the <Start> button on the control panel.
Form Overlay (Making Copies to Overlay Documents)
This feature scans the first page of a document as a form image, and overprints it on
the copies of the subsequent pages.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
1
Select [Form Overlay].
2
Select [On].
Off
Does not overlay a form image.
On
Overlays a form image.
To Next Page
Loading...
