3 Copy
64
Copy
3
îš„Width X%/Length Y%
Allows you to specify reduction/enlargement ratios for the width and length within the
range of 25 to 400% in 1% increments.
îš„XY
Allows you to make the same ratio adjustment for the width and length at the same
time.
When [Calculator %] is Selected
You can specify values for the length and width individually.
If you specify both the original document size and the desired copy size, the copy ratios
for the length and width are calculated automatically within the range from 25 to 400%
according to the values that you entered.
1
Enter the width of the original
document into [Original Size] of
[Width X%] using the numeric
keypad, and select [Next].
2
Enter the width of the output copy
into [Copy Size] of [Width X%]
using the numeric keypad, and
select [Next].
3
In the same way, enter the length of the original document and the length of the output
copy into [Original Size] and [Copy Size] of [Length Y %] respectively, and select
[Next].
Note • To change a value you have entered, select [Next] to move the mark to the desired text
box, and then enter a new value.
îš„Width X% / Length Y%
Displays the ratios that are automatically calculated using the values entered in
[Original Size] and [Copy Size].
îš„Original Size
Allows you to enter the width and length of the original document, in the range of 1 to
999 mm in 1 mm increments.
îš„Copy Size
Allows you to enter the width and length of output copies, in the range of 1 to 999 mm
in 1 mm increments.
Paper Supply (Selecting the Paper for Copying)
This feature allows you to select the tray that holds the paper you want to use.
1
Select a paper tray.
To Next Page
Loading...
Need help?
General
