Operations during Faxing
113
Fax
4
2
Select the job to cancel, and then
select [Cancel].
Changing the Scan Settings
You can change the scan settings while scanning the document.
1
Select [Next Original].
2
Select [Change Settings...].
3
Set [Resolution], [Original Size], and [Lighten/Darken].
For each setting, refer to "Resolution (Specifying the Scanning Resolution)" (P.131), "Original Size
(Specifying the Scan Size for the Original)" (P.133), or "Lighten/Darken (Adjusting Fax Density)"
(P.129).
4
Press the <Start> button.
To Next Page
Loading...
