15 Problem Solving
520
Problem Solving
15
2
Open the front cover of the finisher.
3
Move Lever 2a to the right.
4
Remove the jammed paper.
5
Return Lever 2a to its original position.
6
Close the front cover of the finisher.
Note • If you do not completely close the front cover, the machine will display a message and not
resume operation.
Paper Jams at 2a in the Finisher (Using Wheel 2c)
1
If the edge of the jammed paper
comes out from the exit of the
output tray, gently pull out the
paper to remove.
To Next Page
Loading...
