Layout Adjustment
201
Scan
5
z
Binding Erase
Erases the shadow in the center of facing pages of a bound document. You can set
the binding erase width within the range from 0 to 50 mm in 1 mm increments.
Original Orientation
In order to identify the top of the document, the orientation of the document must be
specified.
Refer to "Original Orientation" (P.191).
Reduce/Enlarge (Specifying a Scanning Ratio)
This feature allows you to set the scanning ratio for the document to be scanned.
1
Select [Reduce/Enlarge].
2
Select or enter a ratio.
Proportional %
Select a preset ratio, or enter a value within the range of 25 to 400% in 1% increments.
To enter a value, touch the entry box, and then use the numeric keypad or the [ ] and
[ ] buttons.
Auto %
In [Output Size], select the output
size of the scanned document. The
machine automatically calculates
the scanning ratio based on the
selected output size and the original
document size.
Note • Selecting [Auto %] may generate blank margin areas.
To Next Page
Loading...
