Xerox ApeosPort-II 5010

Supplies
383
Machine Status
12
Supplies
You can check the status of consumables on the [Supplies] screen. The status of
consumables is shown as "OK", "Replace Soon (Order Now)", or "Replace Now". For
toner, the amount is shown in percentage (0 to 100%).
The following describes the procedure for checking the status of consumables.
For information on replacing consumables, refer to "Maintenance" (P.405).
1 Press the <Machine Status>
button.
2 Select the [Supplies] tab.
Note • Select [ ] to return to the
previous screen or [ ] to
move to the next screen.
On the [Supplies] screen, you can check the following items.
Note • The items displayed vary depending on the options installed.
• Staple Cartridge is displayed when one of the following options is installed: B-Finisher, C-
Finisher, and C-Finisher with Booklet Maker.
• Hole Punch Container is displayed when one of the following options is installed: C-Finisher
and C-Finisher with Booklet Maker.
• Booklet Staple Cartridge is displayed when C-Finisher is installed.
Important • If using a partly consumed toner cartridge (such as a toner cartridge removed from another
ApeosPort-II 5010/4000/3000, DocuCentre-II 5010/4000 unit), the status shown may not
match the actual remaining amount. When replacing toner cartridges, we recommend you
use new ones.
z
Toner Cartridge
z
Booklet Staple Cartridge [R2]
z
Drum Cartridge
z
Booklet Staple Cartridge [R3]
z
Staple Cartridge
z
Hole Punch Container [R4]