14 Maintenance
422
Maintenance
14
Printing a Report/List
This section describes how to print a report/ list.
Note • The items displayed vary depending on the optional features installed.
• When the <Job in Memory> indicator is lit, you can confirm the documents stored to memory
in the [Stored Documents List].
For information about report/list types, refer to "Print Report/List" (P.374).
1
Press the <Machine Status>
button.
2
Select the [Billing Meter/Print
Report] tab.
3
Select [Print Report/List].
Note • If [Print Report Button] under
[Reports] is set to [Disabled],
the [Print Report/List] button
appears only in [User Mode]
of the System Administration
mode. For information on [Reports], refer to "Reports" (P.277).
• If printing [Billing Data List] or [Fax Auditron Administration Report], insert a card to the
machine before instructing to print.
4
Select a report or list you want to
print and press the <Start> button.
123
456
789
0 #
C
<Machine
Status> button
To Next Page
Loading...
