3 Copy
54
Copy
3
Copying Procedure
This section describes the basic copy procedures. The following shows the reference
section for each procedure.
Step 1 Loading Documents.........................................................................................................54
Step 2 Selecting Features ............................................................................................................56
Step 3 Entering a Quantity..........................................................................................................57
Step 4 Starting the Copy Job.......................................................................................................57
Step 5 Confirming the Copy Job in Job Status ...........................................................................58
Step 1 Loading Documents
There are two methods for loading documents:
îš„Document Feeder
z
Single sheet
z
Multiple sheets
îš„Document Glass
z
Single sheet
z
Bound documents, such as books
Document Feeder
The document feeder supports single and multiple sheet documents with sizes from
139.7 x 210 mm (A5, 5.5 x 8.5 inches) to 297 x 432 mm (A3, 11 x 17 inches).
The document feeder automatically detects standard size documents. For non-
standard size documents, input the size in the [Original Size] screen.
For information on entering document sizes, refer to "Original Size (Specifying the Scan Size for the
Document)" (P.72).
Note • The standard document sizes that can be detected automatically depend on the [Paper Size
Settings] in the System Administration mode. For information about paper size settings, refer
to "Paper Size Settings" (P.280).
The document feeder accepts the following number of sheets.
For information about copying mixed sized documents, refer to "Mixed Sized Originals (Scanning
Different Size Documents Simultaneously)" (P.73).
Important • To avoid paper jams, use the document glass for folded or creased documents.
• Two sided scanning of lightweight paper 38 - 49 g/m
2
is not supported.
Document Type (Weight)
Number of
Sheets
Lightweight paper (38 - 49 g/m
2
) 75 sheets
Plain paper (50 - 80 g/m
2
) 75 sheets
Heavyweight paper (81 - 128 g/m
2
) 50 sheets
To Next Page
Loading...
Need help?
General
