EasyManua.ls Logo

Xerox ApeosPort-II 5010

Xerox ApeosPort-II 5010
619 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15 Problem Solving
518
Problem Solving
15
2
Remove the jammed paper under
the upper cover of the finisher
transport.
Note If paper is torn, check for any
torn pieces of paper inside the
machine.
3
Close Top Cover F of the finisher transport.
Paper Jams in the C-Finisher / C-Finisher with Booklet Maker
This section explains how to remove jammed paper from the C-Finisher with Booklet
Maker. Use the same procedures for the C-Finisher.
Paper Jams in the Center Tray ..................................................................................................518
Paper Jams in the Finisher Transport........................................................................................519
Paper Jams at 2a in the Finisher................................................................................................519
Paper Jams at 2a in the Finisher (Using Wheel 2c) ..................................................................520
Paper Jams at 2b in the Finisher................................................................................................522
Paper Jams at 2b in the Finisher (Using Wheel 2c) ..................................................................522
Paper Jams at 3 in the Finisher..................................................................................................523
Paper Jams at 5 in the Finisher..................................................................................................524
Paper Jams at 4a in the Finisher (For C-Finisher with Booklet Maker) ...................................524
Paper Jams at 4b in the Finisher (For C-Finisher with Booklet Maker)...................................525
Paper Jams in the Booklet Tray (For C-Finisher with Booklet Maker)....................................526
Paper Jams in the Center Tray
1
If paper is jammed at the exit of the
center output tray, gently remove
the paper in the right direction.
2
Open the top cover of the finisher
transport, and then close it.

Table of Contents

Related product manuals