General Settings
129
Fax
4
General Settings
You can set the basic features on the [General Settings] screen. The following shows
the reference section for each feature.
Lighten/Darken (Adjusting Fax Density)................................................................................. 129
2 Sided Originals (Transmitting 2-sided Originals)................................................................. 129
Original Type (Selecting the Document Type)........................................................................ 131
Resolution (Specifying the Scanning Resolution) ................................................................... 131
1
Select [Fax/Internet Fax] on the [All
Services] screen.
2
Select the [General Settings] tab,
and then select a feature on the
[General Settings] screen.
Lighten/Darken (Adjusting Fax Density)
You can adjust fax density from seven levels.
1
Use [ ] and [ ] to select a density
level.
2 Sided Originals (Transmitting 2-sided Originals)
This feature enables you to scan and then transmit both sides of a document
automatically.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• The image on the back side of a document is rotated so that it is placed in the same
orientation as the image on the front side.
1
Select a scan option.
1 Sided
Select this option to scan one side of the document.
2 Sided (H to H)
Select this option to scan both sides of the document (Head to Head).
2 Sided (H to T)
Select this option to scan both sides of the document (Head to Toe).
To Next Page
Loading...
