General Settings
131
Fax
4
Original Type (Selecting the Document Type)
This feature allows you to select the type of the original document, such as text and
photo documents.
1
Select the original type.
îš„Text
Select this item when transmitting a document that contains only text.
îš„Photo & Text
Select this item when transmitting a document that contains both text and photos. The
machine automatically distinguishes the text and photo areas and sets the appropriate
image quality for each area of the document.
îš„Photo
Select this item when transmitting documents that contain only photos.
Note • If reduced in size, the scan documents may have stripes in their photo areas.
Resolution (Specifying the Scanning Resolution)
You can set the resolution for the documents to be scanned.
Note • The resolution can be set individually for each address number. For information on how to
register address numbers, refer to "Address Book" (P.328).
• The machine scans a document at the specified resolution, but if the machine of the
recipient does not support the resolution, the machine automatically changes the resolution
to one supported by the recipient's machine and there is a corresponding loss in quality.
• The higher the resolution, the lower the transmission speed. Usually, we recommend using
[Superfine (400dpi)] or lower.
• Only [Fine] is available for the Server Fax feature.
1
Select the resolution.
îš„Standard
Select this item when transmitting standard documents.
(Approx. 200 x 100 pels/25.4 mm)
îš„Fine
Select this item when transmitting documents with small text or detailed images.
(Approx. 200 x 200 pels/25.4 mm)
îš„Superfine (400dpi)
Select this item when transmitting documents with fine images.
(400 x 400 pels/25.4 mm)
To Next Page
Loading...
Need help?
General
