5 Scan
188
Scan
5
Address Book
You can specify the server name, user name and other information from the address
book.
For information on settings of the address book, refer to "Address Book" (P.328).
1
Select [Address Book].
2
Select the destination in which the
data is stored.
Important • You can only use destinations
configured for SMB or FTP.
Any destinations registered for
fax cannot be specified.
Note • Select [ ] to return to the previous screen and select [ ] to move to the next screen.
îš„Details
You can confirm information such
as [Recipient Name] and [Server
Name/IP Address].
Browse...
Displays a hierarchy consisting of server names and folders. You can specify a save
destination by tracing the hierarchy.
1
Select [Browse...].
2
Select the destination in which data
is to be stored.
You can move to another level by
pressing [Previous] or [Next].
Important • You can specify recipients for SMB only.
îš„Save in:
Shows the current location in the hierarchy.
Specifying a Destination
Enter information into the fields provided for the selected protocol, to specify a
forwarding destination.
1
Select the item to be set.
Note • You can also select [Address
Book] to enter information.
• The setup fields displayed on
the screen depend on the
selected protocol.
To Next Page
Loading...
Need help?
General
