Xerox ApeosPort-II 5010

System Settings Menu List
257
System Settings
10
System Settings Menu List
The following table shows a list of the settings available in [System Settings]. Note that
the setting items displayed on screens depend on the configuration of the machine.
System Settings
Common Settings
Machine Clock/Timers (P.267)
z
Date (P.267)
z
Time (P.267)
z
Time Zone (P.268)
z
Daylight Savings (P.268)
z
NTP Time Synchronization (P.268)
- Connection to Time Server (P.268)
- Connection Interval (P.268)
- Time Server IP Address (P.268)
z
Auto Clear (P.268)
z
Auto Job Release (P.268)
z
Auto Print (P.269)
z
Printer Lockout Duration (P.269)
z
Auto Power Saver (P.269)
Audio Tones (P.269)
z
Control Panel Select Tone (P.269)
z
Control Panel Alert Tone (P.269)
z
Machine Ready Tone (P.269)
z
Copy Job Complete Tone (P.269)
z
Non-Copy Job Complete Tone (P.270)
z
Fault Tone (P.270)
z
Alert Tone (P.270)
z
Out of Paper Warning Tone (P.270)
z
Low Toner Alert Tone (P.270)
z
Line Monitor Volume (P.270)
z
Ringing Volume (P.270)
z
Stored Programming Tone (P.270)
z
Auto Clear Alert Tone (P.270)
z
Base Tone (P.271)
Screen/Button Settings (P.271)
z
Screen Default (P.271)
z
Screen After Auto Clear (P.271)
z
Auto Display of Login Screen (P.271)
z
All Services (P.271)
z
Custom Buttons 1 to 3 (P.271)
z
Job Type on Job Status Screen (P.271)
z
Default Language (P.272)
Paper Tray Settings (P.272)
z
Custom Paper Name (P.272)
z
Paper Size/Type (P.272)
- Paper Size (P.272)
- Paper Type (P.272)
z
Paper Tray Attributes on Setup Menu (P.272)
z
Paper Tray Attributes During Loading (P.272)
z
Paper Tray Priority (P.273)
z
Paper Type Priority (P.273)
z
Tray 5 (Bypass) - Paper Size Defaults (P.273)
z
Auto Tray Switching (P.273)