10 System Settings
296
System Settings
10
Device Certificate - Server
You can select a certificate to be linked.
HTTP - SSL/TLS Communication
Enables or disables the HTTP SSL/TLS communications.
HTTP - SSL/TLS Port Number
Specifies the port number used for HTTP SSL/TLS communication within the range from 1 to
65535.
Important • Do not use the port numbers of the other ports.
Other Settings
In [Other Settings], you can set the following items.
For information on other settings, refer to the Network Administrator Guide.
E-mail Receive Protocol
Select from [SMTP] and [POP3] depending on the usage environment.
Output Destination for E-mail
Specify an output destination for e-mail printing. Selecting [Auto] sets to the default output
destination.
To Next Page
Loading...
