3 Copy
78
Copy
3
Original Orientation (Specifying the Orientation of Loaded Documents)
This feature allows you to specify the orientation of a document to have the machine
identify the top of the document.
Note • If the [Original Orientation] differs from the actual document orientation, then the machine
may mistakenly detect the top of the document.
1
Select [Original Orientation].
2
Select [Upright Images] or
[Sideway Images] in accordance
with the orientation of the
document loaded.
îš„Upright Images
Select this item when placing the top edge of the document against the top side of the
document glass or document feeder.
îš„Sideways Images
Select this item when placing the top edge of the document against the left side of the
document glass or document feeder.
To Next Page
Loading...
Need help?
General
