E-mail
185
Scan
5
Subject
Set the e-mail subject using the following procedure.
îš„Auto Set
Automatically sets the subject to [Scan data from XXX] (where XXX is the host name
of the machine).
îš„To set a user-defined subject
1
Select [Subject].
2
Enter a subject of up to 128 characters using the displayed keyboard.
For information on how to enter characters, refer to "Entering Text" (P.266).
Message
Enter the e-mail body using the following procedure.
1
Select [Message].
2
Enter a message of up to 256 characters using the keyboard.
For information on how to enter characters, refer to "Entering Text" (P.266).
To Next Page
Loading...
Need help?
General
