9 Paper and Other Media
244
Paper and Other Media
9
z
Paper should be stored flat to prevent bends or warping.
Please adhere to the following when setting paper into the tray
z
Align the stack of paper neatly before setting it in the tray.
z
Do not use paper that is folded, creased, or heavily warped.
z
Do not use waved or curled paper.
z
Do not load paper of mixed size together into the tray.
z
Transparency paper and label paper can cause paper jams, and multiple sheets can
be fed to the printer at once. Be sure to carefully fan these types of paper.
z
If continuously output, transparency sheets may sometimes stick to each other.
Remove transparencies from the output tray every 20 sheets, and fan them to cool
them down.
To Next Page
Loading...
