Scan Mode Settings
303
System Settings
10
Original Type
Set the default value for [Original Type] in the [General Settings] screen.
File Format
Set the default value for [File Format] in the [General Settings] screen.
Lighten/Darken
Set the default value for [Lighten/Darken] of [Image Options] in the [Image Quality] screen.
Sharpness
Set the default value for [Sharpness] of [Image Options] in the [Image Quality] screen.
Background Suppression
Set the default value for [Background Suppression] in the [Image Quality] screen.
Original Orientation
Set the default value for [Original Orientation] when scanning.
Scan Resolution
Set the default value for [Scan Resolution] in the [Layout Adjustment] screen.
You can select from 200 dpi, 300 dpi, 400 dpi, and 600 dpi.
Mixed Sized Originals
Set the default value for [Mixed Sized Originals] in the [Layout Adjustment] screen.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
Edge Erase
Set the default value for [Edge Erase] in the [Layout Adjustment] screen. You can select from
[Normal] or [Edge Erase].
Edge Erase - Top & Bottom Edges
Set the default value for the amount of edges erased from the original in the top and bottom
directions in [Edge Erase] in the [Layout Adjustment] screen. Specify a value from 0 to 50 mm
in 1 mm increments.
Edge Erase - Left & Right Edges
Set the default value for the amount of edges erased from the original in the left and right
directions in [Edge Erase] in the [Layout Adjustment] screen. Specify a value from 0 to 50 mm
in 1mm increments.
Center Erase/Binding Erase
Set the default value for the binding erase amount of the original in [Edge Erase] in the
[Layout Adjustment] screen. Specify a value from 0 to 50 mm in 1 mm increments.
E-mail Subject
Set the default value for the e-mail subject. Up to 128 characters can be entered for the
subject.
To Next Page
Loading...
