Xerox ApeosPort-II 5010 User Manual

14 Maintenance
418
Maintenance
14
2 Pull up the green lever to open the
inner cover.
3 Stick the supplied pin into the old
stamp cartridge, and pull it straight
out of the machine.
Note • If only the sponge part of the
stamp cartridge is removed,
make sure to remove the
bottom part of it also.
4 Insert the new stamp cartridge in
the machine.
5 Close the inner cover, and then close the document feeder cover until it clicks into
place.

Xerox ApeosPort-II 5010 Specifications

General

Brand	Xerox
Model	ApeosPort-II 5010
Category	All in One Printer
Language	English