15 Problem Solving
442
Problem Solving
15
The printing is not offset. Cause The machine does not have the offset feature.
No Action For offset output, the Exit Kit (Exit2+OCT2) or the finisher must
be attached.
Printing is slow. Cause [High Resolution] has been selected for [Print Mode].
No Action When image data, such as a photo, is printed with the high
image quality, the print speed becomes slow. Select [Normal]
for [Print Mode].
The print option settings
do not take effect.
Cause The print driver used is for another model.
No Action Install the print driver for this model.
Cause The required optional kit is not attached on the machine.
Action Check the options attached on the machine, and set the
configuration again.
Image edges are missing. Cause The image is larger than the printable area.
Action Expand the printable area, or reduce the document print area.
To Next Page
Loading...
Need help?
General
