15 Problem Solving
510
Problem Solving
15
3
Lift up the lever on the upper right
side of Cover A, and open Cover A.
4
If paper is jammed at the Fuser
Unit, push down green lever A2 in
the direction of the arrow to open
the Fuser Unit cover.
5
If paper is jammed inside the Fuser
Unit, gently remove the paper while
holding down green lever A2.
Note • If the paper is torn, check for
any torn pieces inside the
machine.
6
Push the center section of Cover A,
and firmly close Cover A.
7
Close Tray 5 (Bypass).
To Next Page
Loading...
