EasyManuals Logo

Xerox ApeosPort-II 5010 User Manual

Xerox ApeosPort-II 5010
619 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #537 background imageLoading...
Page #537 background image
Stapler Faults
535
Problem Solving
15
3
Hold the booklet staple cartridge by
its left and right tabs, and then lift
the cartridge to remove.
4
Remove the jammed staples as
shown in the figure.
5
Holding the booklet staple cartridge
by its left and right tabs, return the
cartridge to its original position, and
then gently push the cartridge in
until you hear it click into place.
6
Return the unit to its original
position.
7
Close the front cover of the finisher.
Note • If you do not completely close the front cover, the machine will display a message and not
resume operation.
If you cannot remove jammed staples even after you use the above procedure, contact
our Customer Support Center.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox ApeosPort-II 5010 and is the answer not in the manual?

Xerox ApeosPort-II 5010 Specifications

General IconGeneral
BrandXerox
ModelApeosPort-II 5010
CategoryAll in One Printer
LanguageEnglish

Related product manuals