Xerox ApeosPort-II 5010

16 Appendix
540
Appendix
16
Paper feed method/
Capacity
[4-tray model]
500 sheets × 4 trays + 100 sheets (Bypass tray)
Maximum paper feed capacity: 2,100 sheets
[Tandem tray model]
500 sheets × 2 trays (Trays 1 and 2) + 800 sheets (Tray 3) +
1,200 sheets (Tray 4) + 100 sheets (Bypass tray)
Maximum paper feed capacity: 3,100 sheets
Important • The above values are based on when Xerox P paper (64 g/
m
2
) is used.
• The bypass tray capacity for 80 g/m
2
paper is 95 sheets.
Continuous copy pages 999 images
Note • The machine may pause temporarily to perform image
stabilization.
Output tray capacity Exit 2 Tray (optional) *1: Approx. 250 sheets (A4)
Center output tray *2:
When Exit 2 Tray (optional) is installed:
Approx. 250 sheets (A4)
When B-Finisher (optional) is installed:
Approx. 250 sheets (A4)
When the above two options are not installed:
Approx. 500 sheets (A4)
Side Tray (optional): Approx. 100 sheets (A4)
*1When Exit 2 Tray is installed, [Exit 2 tray] is displayed as [Center
output tray-upper].
*2When Exit 2 Tray is installed, [Center output tray] is displayed as
[Center output tray-lower].
Important • When using Xerox P paper
Power source 110 - 120 V AC & 220 - 240 V AC
Power consumption Maximum power consumption
: 1.50 KVA (@110 VAC)
: 1.44 KVA (@120 VAC)
: 1.76 KVA (@220 VAC)
: 1.92 KVA (@240 VAC)
Sleep mode
<DocuCentre-II 5010/4000> (Copier-only model)
: 1.3 W (@110 VAC)
: 1.8 W (@220 VAC)
<DocuCentre-II 5010/4000> (Copier/printer model)
: 3.8 W (@110 VAC)
: 4.4 W (@200 VAC)
<ApeosPort-II 5010/4000/3000>
: 5.6 W (@110 VAC)
: 6.4 W (@200 VAC)
Dimensions <DocuCentre-II 5010/4000>
Width 640 x Depth 652 x Height 832 mm (without optional tray
module)
<ApeosPort-II 5010/4000/3000>
Width 640 x Depth 678 x Height 1112 mm (with optional tray
module)
Weight
(Paper, optional units,
and consumables (toner
and drum cartridges) are
not included.)
<DocuCentre-II 5010/4000>
73.0 kg
<ApeosPort-II 5010/4000/3000>
75.0 kg