Sending an e-mail
Before you begin, make sure that the SMTP settings are configured. For more information, see Configuring the e-
mail SMTP settings.
USING THE CONTROL PANEL
1. Load an original document into the ADF tray or on the scanner glass.
2. From the home screen, touch EE--mmaaiill, and then enter the needed information.
3. If necessary, configure the output file type settings.
4. Send the e-mail.
USING A SHORTCUT NUMBER
1. Load an original document into the ADF tray or on the scanner glass.
2. From the home screen, touch SShhoorrttccuuttss >> EE--mmaaiill.
3. Select the shortcut number.
4. Send the e-mail.
Xerox
®
B305/B315 Multifunction Printer User Guide 107
E-mail
To Next Page
Loading...
