Xerox B315 - PCL

PCL
MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
FFoonntt NNaammee
[List of available fonts] (Courier*)
Select a font from the specified font source.
SSyymmbbooll SSeett
[List of available symbol set] (10U PC-8*)
Specify the symbol set for each font name.
Note: A symbol set is a set of alphabetic and
numeric characters, punctuation, and special
symbols. Symbol sets support the different
languages or specific programs such as math
symbols for scientific text.
PPiittcchh
0.08–100.00 (10.00*)
Specify the pitch for fixed or monospaced fonts.
Note: Pitch refers to the number of fixed-space
characters in a horizontal inch of type.
OOrriieennttaattiioonn
Portrait*
Landscape
Reverse Portrait
Reverse Landscape
Specify the orientation of text and graphics on the
page.
LLiinneess ppeerr PPaaggee
1–255
Specify the number of lines of text for each page
printed through the PCL® data stream.
• This menu item activates vertical escapement that
causes the selected number of requested lines to
print between the default margins of the page.
• 60 is the U.S. factory default setting. 64 is the
international factory default setting.
PPCCLL55 MMiinniimmuumm LLiinnee WWiiddtthh
1–30 (2*)
Set the initial minimum stroke width.
Jobs printed in 1200 dpi use the value directly.
PPCCLLXXLL MMiinniimmuumm LLiinnee WWiiddtthh
1–30 (2*)
AA44 WWiiddtthh
198mm*
203mm
Set the width of the logical page on A4-size paper.
Note: Logical page is the space on the physical
page where data is printed.
AAuuttoo CCRR aafftteerr LLFF
Off*
On
Set the printer to perform a carriage return after a line
feed control command.
Xerox
®
B305/B315 Multifunction Printer User Guide 147
Use printer menus