Xerox B315 - Fax Receive Settings

Fax Receive Settings
MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
RRiinnggss ttoo AAnnsswweerr
1–25 (3*)
Set the number of rings for incoming fax.
AAuuttoo RReedduuccttiioonn
On*
Off
Scale incoming fax to fit on the page.
PPaappeerr SSoouurrccee
Tray [X]
MP Feeder
Auto*
Set the paper source for printing incoming fax.
SSiiddeess
On
Off*
Print on both sides of the paper.
SSeeppaarraattoorr SShheeeettss
None*
Before Job
After Job
Specify whether to insert blank separator sheets when
printing.
SSeeppaarraattoorr SShheeeett SSoouurrccee
Tray [X] (1*)
MP Feeder
Specify the paper source for the separator sheet.
FFaaxx FFooootteerr
On
Off*
Print the transmission information at the bottom of
each page from a received fax.
FFaaxx FFooootteerr TTiimmee SSttaammpp
Receive*
Print
Print the time stamp at the bottom of each page from
a received fax.
Note: An asterisk (*) next to a value indicates the factory default setting.
Xerox
®
B305/B315 Multifunction Printer User Guide 161
Use printer menus