Xerox B315 - 802.1 x

MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
8*
24
PPrrooppoosseedd EEnnccrryyppttiioonn MMeetthhoodd
3DES
AES*
Specify the encryption and authentication methods to
connect to a network securely.
These menu items appear only when Base
Configuration is set to Compatibility.
PPrrooppoosseedd AAuutthheennttiiccaattiioonn MMeetthhoodd
SHA1
SHA256*
SHA512
IIPPSSeecc DDeevviiccee CCeerrttiiffiiccaattee Specify an IPSec certificate.
This menu item appears only when Enable IPSec is set
to On.
PPrree--SShhaarreedd KKeeyy AAuutthheennttiiccaatteedd CCoonnnneeccttiioonnss
Host [x]
Address
Key
Configure the authenticated connections of the printer.
These menu items appear only when Enable IPSec is
set to On.
CCeerrttiiffiiccaattee AAuutthheennttiiccaatteedd CCoonnnneeccttiioonnss
Host [x] Address[/subnet]
Address[/subnet]
Note: An asterisk (*) next to a value indicates the factory default setting.
802.1X
Note: This menu appears only in network printers or printers that are attached to print servers.
MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
AAccttiivvee
Off*
On
Let the printer join networks that require
authentication before allowing access.
880022..11xx AAuutthheennttiiccaattiioonn
• Device Login Name
• Device Login Password
• Validate Server Certificate
The Device Login Name is used to log-in to the
authentication server.
The Device Login Password must be at least 8
characters long.
Xerox
®
B305/B315 Multifunction Printer User Guide 189
Use printer menus