Xerox B315 - TCP;IP

MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
Off If PS SmartSwitch is off, then the printer does not
examine incoming data and uses the default printer
language specified in the Setup menu.
MMaacc BBiinnaarryy PPSS
Auto*
On
Off
Set the printer to process Macintosh binary PostScript
print jobs.
• On processes raw binary PostScript print jobs.
• Off filters print jobs using the standard protocol.
EEnneerrggyy EEffffiicciieenntt EEtthheerrnneett
Auto*
On
Off
Reduce power consumption when the printer does not
receive data from the Ethernet network.
Note: An asterisk (*) next to a value indicates the factory default setting.
TCP/IP
Note: This menu appears only in network printers or printers attached to print servers.
MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
SSeett HHoossttnnaammee Set the current TCP/IP host name.
DDoommaaiinn NNaammee Set the domain name.
AAllllooww DDHHCCPP//BBOOOOTTPP ttoo uuppddaattee NNTTPP sseerrvveerr
On*
Off
Allow the DHCP and BOOTP clients to update the NTP
settings of the printer.
ZZeerroo CCoonnffiigguurraattiioonn NNaammee Specify a service name for the zero configuration
network.
EEnnaabbllee AAuuttoo IIPP
On*
Off
Assign an IP address automatically.
DDNNSS AAddddrreessss Specify the current Domain Name System (DNS) server
address.
BBaacckkuupp DDNNSS Specify the backup DNS server addresses.
BBaacckkuupp DDNNSS 22
BBaacckkuupp DDNNSS 33
184
Xerox
®
B305/B315 Multifunction Printer User Guide
Use printer menus