Basic Regulations
NOISE EMISSION LEVELS
The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO
9296.
Note: Some modes may not apply to your product.
11--MMEETTEERR AAVVEERRAAGGEE SSOOUUNNDD PPRREESSSSUURREE,, DDBBAA
Printing One-sided: 53
Two-sided: 50
Scanning 58
Copying 59
Ready 14
STATIC SENSITIVITY NOTICE
This symbol identifies static-sensitive parts. Do not touch the areas near these symbols
without first touching a metal surface in an area away from the symbol.
To prevent damage from electrostatic discharge when performing maintenance tasks, such
as clearing paper jams or replacing supplies, touch any exposed metal frame of the printer
before accessing or touching interior areas of the printer, even if the symbol is not present.
ENERGY STAR
Any Xerox product bearing the ENERGY STAR emblem on the product or on a start-up
screen is certified to comply with Environmental Protection Agency (EPA) ENERGY STAR
requirements as of the date of manufacture.
TEMPERATURE INFORMATION
Ambient operating temperature 10 to 32.2°C (50 to 90°F)
Shipping temperature -40 to 40°C (–40 to 104°F)
Storage temperature and relative
humidity
-40 to 40°C (–40 to 104°F), 8 to 80% RH
308
Xerox
®
B305/B315 Multifunction Printer User Guide
Regulatory Information
To Next Page
Loading...
