Light print
Note: Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to
SSeettttiinnggss > TTrroouubblleesshhoooottiinngg > PPrriinntt QQuuaalliittyy TTeesstt PPaaggeess. For non-touch-screen printer models, press OOKK to
navigate through the settings.
AACCTTIIOONN YYEESS NNOO
SStteepp 11
1 Check if the printer is using a
genuine and supported Xerox
toner cartridge.
If the cartridge is not supported,
then install a supported one.
2 Print the document.
Is the print light?
Go to step 2. The problem is solved.
SStteepp 22
1 Turn off the printer, wait for
about 10 seconds, and then
turn on the printer.
2 Increase toner darkness.
From the control panel, navigate
to: SSeettttiinnggss > PPrriinntt > QQuuaalliittyy >
TToonneerr DDaarrkknneessss
3 Print the document.
Is the print light?
Go to step 3. The problem is solved.
SStteepp 33
1 Depending on your operating
system, specify the paper type
from the Printing Preferences or
Print dialog.
• Make sure that the setting
matches the paper loaded.
• You can also change the
setting on the printer control
panel. Navigate to SSeettttiinnggss
> PPaappeerr > TTrraayy
Go to step 4. The problem is solved.
Xerox
®
B305/B315 Multifunction Printer User Guide 235
Troubleshoot a problem
To Next Page
Loading...
