Xerox B315 - Page 148

MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
Note: Carriage return is a mechanism that
commands the printer to move the position of
the cursor to the first position on the same line.
AAuuttoo LLFF aafftteerr CCRR
Off*
On
Set the printer to perform a line feed after a carriage
return control command.
TTrraayy RReennuummbbeerr
Assign MP Feeder
Assign Tray [x]
Assign Manual Paper
Assign Manual Envelope
Configure the printer to work with a different print
driver or custom application that uses a different set of
source assignments to request a given paper source.
Choose from the following options:
Off*—The printer uses the factory default paper source
assignments.
None—The paper source ignores the Select Paper Feed
command.
0–199—Select a numeric value to assign a custom
value to a paper source.
TTrraayy RReennuummbbeerr
View Factory Defaults
Show the factory default value assigned for each paper
source.
TTrraayy RReennuummbbeerr
Restore Defaults
Restore the tray renumber values to their factory
defaults.
PPrriinntt TTiimmeeoouutt
Disabled
Enabled*
Set the printer to end a print job after it has been idle
for the specified amount of time in seconds.
Note: This menu item appears only when Print
Timeout is enabled.
PPrriinntt TTiimmeeoouutt TTiimmee
1–255 (90*)
Note: An asterisk (*) next to a value indicates the factory default setting.
148
Xerox
®
B305/B315 Multifunction Printer User Guide
Use printer menus