3. Twist the blue latch, and then remove the toner cartridge from the used imaging unit.
4. Unpack the new imaging unit, and then insert the toner cartridge until it clicks into place.
WWaarrnniinngg:: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure
to light may cause print quality problems.
WWaarrnniinngg:: Do not touch the photoconductor drum. Doing so may affect the quality of future print jobs.
5. Insert the new imaging unit.
216 Xerox
®
B305/B315 Multifunction Printer User Guide
Maintain the printer
To Next Page
Loading...
