7/98
Xerox DocuPrint P8e Service Manual 2-5 Printer Specifications
2.6.1 Paper Limitations
The following are recommended for optimum performance:
• Adhesive label sheets specifically designed for laser printers.
• Transparencies specifically designed for laser printers
• Envelopes with peel-off adhesive strips or more than one fold-over flap to seal must have
adhesives compatible with the heat and pressure of the printer's fusing process.
• Avoid:
— Paper with embossed lettering, perforations, or rough texture.
— Paper to which color was added after the paper was made.
— Printed forms whose ink is not for laser printing.
Most papers that meet the above specifications may be fed either through the multisheet or the single
sheet paper feeder. Some media meets the specifications but is not ideal for feeding, e.g., paper that is
either highly textured, thicker than normal for its weight, or unusually smooth.
Paper types
2.7 Operating Language and Emulation
The Xerox P8e uses the enhanced PCL5 language (PCL 5e).
The Xerox P8e emulates the HP 5P and lower (PCL 5e).
Paper Type Capacity (Sheets)
A4/Letter
Letter
Executive, Legal
B5
A5
Monarch (7 3/4)
COM10
#9
C5
D5
DL
150
To Next Page
Loading...
Need help?
General