Loading Paper
Phaser® 6180MFP Multifunction Printer
5-14
2. Slide the width guides to the edge of the tray. The width guides should be fully extended.
Note: When loading paper that is 216 mm (8.5 in.) wide, such as Letter-size or Legal-size
paper, set the tab on the side of the tray to the (8.5) position.
3. Squeeze the green tab on the length guide, and then slide the tray until the arrow lines up
with the appropriate paper size. The guide clicks into place. The length guide extends
beyond the edge of the tray for paper that is longer than 279 mm (11 in.).
6180mfp-009
6180mfp-010
To Next Page
Loading...
