Loading Paper
Phaser® 6180MFP Multifunction Printer
5-15
4. Before loading the print media, flex the sheets back and forth, and then fan them.
Straighten the edges of the stack on a level surface.
5. Place the print media into the tray with the print side faceup.
Note: Do not exceed the maximum fill line in the tray. Overfilling the tray may cause
paper jams.
6. Slide the width guides and length guide until they rest lightly against the edge of the print
media stack.
6180mfp-011
6180mfp_012
To Next Page
Loading...
