EasyManuals Logo

Xerox WorkCentre Series User Manual

Xerox WorkCentre Series
720 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
Safety and Regulations WorkCentre
®
XXXX
12 User Guide
Electrical Supply
This document provides important electrical supply safety information that you should read before
installing or using the device.
Read the information in the following sections:
• Power Outlet Electrical Safety
• Power Cord Electrical Safety
•Device Safety
•Emergency Power Off
• Disconnect Device
Power Outlet Electrical Safety
This device must be operated from the type of electrical supply indicated on the data plate label
located on the rear cover of the device. If you are not sure that your electrical supply meets the
requirements, please consult your local power company or a licensed electrician for advice.
The electrical supply outlet should be installed near the device and should be easily accessible.
WARNING: This device must be connected to a protective earth circuit. This device is
supplied with a plug that has a protective earth pin. This plug will only fit into an earthed
electrical outlet. This is a safety feature. If you are unable to insert the plug into the outlet,
contact a licensed electrician to replace the outlet. Always connect the device to a correctly
grounded power outlet. If in doubt, have the outlet checked by a qualified electrician. Im-
proper connection of the device-grounding conductor can result in electrical shock.
Power Cord Electrical Safety
• Use only the power cord supplied with this device.
• Plug the power cord directly into a grounded electrical outlet. Do not use an extension cord. If
you do not know whether or not an outlet is grounded, consult a qualified electrician.
• Do not place this device where people might step on or trip on the power cord.
• Do not place objects on the power cord.
• To reduce the risk of fire, use only No. 26 American Wire Gauge (AWG) or larger
telecommunication line cord.
Device Safety
This device has been designed to provide operator access to safe areas only. Operator access to
hazardous areas is restricted using covers or guards, which require a tool to enable removal. Never
remove the covers or guards that protect hazardous areas.

Table of Contents

Other manuals for Xerox WorkCentre Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WorkCentre Series and is the answer not in the manual?

Xerox WorkCentre Series Specifications

General IconGeneral
BrandXerox
ModelWorkCentre Series
CategoryAll in One Printer
LanguageEnglish

Related product manuals