Safety and Regulations WorkCentre
®
XXXX
User Guide 25
The Xerox WorkCentre™ 5945 / 5955 is ENERGY STAR® qualified under the
ENERGY STAR Program Requirements for Imaging Equipment.
The ENERGY STAR and ENERGY STAR MARK are registered United States
trademarks. The ENERGY STAR Office Equipment Program is a team effort between
U.S., European Union and Japanese governments and the office equipment
industry to promote energy-efficient copiers, printers, fax, multifunction devices, personal
computers, and monitors. Reducing device energy consumption helps combat smog, acid rain and
long-term changes to the climate by decreasing the emissions that result from generating
electricity. Xerox ENERGY STAR equipment is preset at the factory.
The ENERGY STAR program is a voluntary scheme to promote the development and purchase of
energy efficient models, which help to reduce environmental impact. Details on the ENERGY STAR
program and models qualified to ENERGY STAR can be found in the website below - http://
www.energystar.gov/index.cfm?fuseaction=find_a_product.showProductGroup&pgw_code=IEQ
Power Consumption and Activation Time
The amount of electricity a product consumes depends on the way the device is used. This product
is designed and configured to enable you to reduce your electricity costs. After the last print it
switches to Ready Mode. In this mode it can print again immediately if required. If the product is
not used for a period of time, the device switches to a Power Saver Mode. In these modes, only
essential functions remain active in order to enable reduced product power consumption.Upon
exiting from Power Saver Mode, the first print will take slightly longer than in Ready Mode. This
delay is the result of the system “waking up” from Power Saver mode and is typical of most imaging
products on the market.If you wish to set a longer Activation Time or would like to completely
deactivate the Power Save Mode, please consider that this device may then only switch to a lower
energy level after a longer period of time or not at all.To learn more about Xerox’s participation in
sustainability initiatives, please visit our site at:
http://www.xerox.com/about-xerox/environment/enus.html
Canada
Environmental Choice
Certified to Office Machines CCD-035
This product is certified to Environmental Choice® standard for Office Machines, meeting all
requirements for reduced environmental impact. As part of achieving certification, Xerox
Corporation has proven this product meets the standard’s criteria for energy efficiency. Certified
copier, printer, multifunctional device, and fax products must also meet criteria such as reduced
chemical emissions and demonstrate compatibility with recycled supplies. Environmental Choice
was established in 1988 to help consumers find products and services with reduced environmental
impacts. Environmental Choice is a voluntary, multi-attribute and lifecycle based environmental
certification that indicates a product has undergone rigorous scientific testing, exhaustive auditing,
or both, to prove its compliance with stringent, third-party, environmental performance standards
To Next Page
Loading...
