User Guide 655
Machine and Job Status
Job Status
Active Jobs
Viewing Active Jobs using the Job Status Menu
The Job Status button gives you access to job information. You can use this to check the progress
of active jobs or display detailed information about jobs you have completed. You can also release
held jobs or secure print jobs you have sent to the device.
Use the Active Jobs screen to see all the jobs currently in the list waiting to be processed. Each job
is identified with the owner, job name and status of the job. The Active Jobs list displays up to 150
jobs.
The Job Status is updated as jobs are processed and printed. The status options available depend
on the type of job.
• Printing indicates that the device is currently printing the job.
• Processing the device is formatting the job ready to print.
• Waiting to Print the job is ready to print and is waiting for the current job to finish printing and
the required resources to become available.
• Held: Deferred Print the job is waiting to be released from the print queue.
• Scheduling the job has been converted into the appropriate format and is being scheduled to
print.
• Pending the job has been scanned, but is awaiting the resources to be formatted.
• Paused the active job was paused. Jobs can be paused due to a system fault during the running
of the job. Paused jobs are not deleted from the list and can be resumed.
• Interrupted the job was suspended because a task at the device is being performed. Once the
task has been completed the suspended job automatically continues.
• Sending the device is sending the job through a network transmission.
• Completed the job was successfully completed without errors.
• Formatting the job is being converted into the appropriate format. For print jobs the job is
decompressed, for Fax, Internet Fax, Scan and E-mail tasks the job is compressed.
• Scanning the device is currently scanning the image for this job, ready for formatting.
• Held the job has been temporarily stopped from printing because the required resources are
not available. The job remains in the job list and continues to proceed up the list as prior jobs
are printed. If a held job is at the top of the list all subsequent jobs continue to be processed
and printed, a held job does not hold up other jobs in the list. The reason for the held status is
displayed on the Job Progress screen.
• Receiving the device is receiving the job through a network transmission.
11
To Next Page
Loading...
Need help?
General
