General Care and Troubleshooting WorkCentre
®
XXXX
686 User Guide
The type of fault screen presented depends on the type of fault occurring. Some fault displays
present the user with fault recovery options. A selection of buttons allow you to choose a fault
recovery option.
When an interrupting fault window is displayed, any status messages associated with the displayed
fault are presented in the Status Message area.
Non-Interrupting Fault
Non-Interrupting fault displays consist of messages displayed in the Status Message area. They do
not affect the successful completion of a job from the current pathway. For example, if the user is
running a Copy job and a fault occurs with faxing, then a non-interrupting fault display is presented.
Both Interrupting and Non-Interrupting fault displays are generated automatically by the device
and are displayed in the fault logs. Once the conditions which resulted in the fault display being
generated have been resolved, the display is removed.
Fault Logs
Fault information can be accessed using the Machine Status button.
Machine Status provides information about the device, the status of the paper trays, consumables
and any current faults. Usage counters are also available.
The Active Messages tab displays fault listings and the device error logs.
The faults are separated into Faults, Alerts and Fault History.
• Faults this option displays a list of any current faults on the device. Each fault can be selected
for further information and instructions.
• Alerts this option displays a list of all the current fault messages associated with the current
device status and faults.
• Fault History this is a log of the last 20 faults occurring on the device. The fault code associated
with each fault and the date and time a fault occurred is displayed. It also displays the device
image count at the time each fault occurred and any relevant paper or document size
information.
More Information
Viewing Alert Messages using the Machine Status Menu
Viewing Faults using the Machine Status Menu
Paper Jams
Document Feeder
Clearing a Misfeed in the Top of the Document Feeder
The device displays status code 05-330-00, 05-335-00 or 05-361-00.
The message on the device touch screen reads: Misfeed in Document Feeder. Open the
Document Feeder Top Cover.
To Next Page
Loading...
Need help?
General
