Xilinx Vivado MIPI CSI-2 User Manual

MIPI CSI-2 RX Subsystem v4.0 58
PG232 July 02, 2019 www.xilinx.com
Chapter 4: Design Flow Steps
Target Board: Target board on which the Application example design to be built.
Supported value(s) are ZCU102.
FMC Model: FMC Model to connect MIPI Camera Sensor and MIPI Display. Supported
value(s) are LI-IMX274MIPI-FMC V1.0 Single Sensor.
Design Topology: Application example design configuration type. Select
MIPI_Video_Pipe_Camera_to_Display to view the flow from camera receive path to display
path either on HDMI monitor or MIPI DSI display.
X-Ref Target - Figure 4-5
Figure 4-5: Subsystem Customization Screen - Application Example Design
Send Feedback

Xilinx Vivado MIPI CSI-2 Specifications

General

Brand	Xilinx
Model	Vivado MIPI CSI-2
Category	Receiver
Language	English