Xilinx Vivado MIPI CSI-2 - Simulation and Synthesis;Implementation

MIPI CSI-2 RX Subsystem v4.0 62
PG232 July 02, 2019 www.xilinx.com
Chapter 4: Design Flow Steps
Simulation
Simulation supported example design is not available for MIPI CSI-2 RX Subsystem.
However user can generate MIPI CSI-2 Tx Subsystem simulation example design to analyze
the simulation behavior of MIPI CSI-2 Rx Subsystem. MIPI CSI-2 RX Subsystem provides an
Application Example Design which can be implemented on the hardware. See Chapter 5,
Application Example Design for details.
For comprehensive information about Vivado simulation components, as well as
information about using supported third-party tools, see the Vivado Design Suite User
Guide: Logic Simulation (UG900) [Ref 11].
Synthesis and Implementation
For details about synthesis and implementation, see the Vivado Design Suite User Guide:
Designing with IP (UG896) [Ref 9].
Send Feedback