Xilinx Zynq-7000 Design Guide

Zynq-7000 PCB Design Guide www.xilinx.com 71
UG933 (v1.8) November 7, 2014
Chapter 6: Migration from XC7Z030-SBG485 to XC7Z015-CLG485 Devices
connected on the XC7Z015-CLG485 device, but that are connected on the XC7Z030-SBG485
device.
Software Considerations
The Zynq-7000 XC7Z015 device is not supported in the ISE Design Suite and you should not
use the Zynq-7000 XC7Z030 device in the SBG485 package in an attempt to migrate to a
Zynq-7000 XC7Z015 device in the ISE Design Suite. You must use the Vivado Design Suite to
migrate from the Zynq-7000 XC7Z030 device in the SBG485 package to the Zynq-7000
XC7Z015 device.
Send Feedback

Xilinx Zynq-7000 Specifications

General

Series	Zynq-7000
Number of Cores	Dual-core
Processor Speed	Up to 1 GHz
Device Type	SoC
Logic Cells	Up to 350K
DSP Slices	Up to 900
External Memory Interfaces	DDR3, DDR2, LPDDR2
I/O Standards	LVCMOS, HSTL, SSTL
Operating Temperature	-40°C to +100°C (Industrial), 0°C to +85°C (Commercial)
Package Options	Various BGA packages
I/O Voltage	3.3V