EasyManua.ls Logo

Yamaha DSP-AZ2 Service Manual

Yamaha DSP-AZ2
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
100822
IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons,
we advise all YAMAHA product owners that any service required should be performed by an authorized
YAMAHA Retailer or the appointed service representative.
IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and
service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable
and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please
contact the distributor's Service Division.
WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
P.O.Box 1, Hamamatsu, Japan
CONTENTS
TO SERVICE PERSONNEL .......................................... 2
IMPEDANCE SELECTOR ............................................. 2
FRONT PANELS ............................................................ 3
REAR PANELS .......................................................... 4~5
REMOTE CONTROL...................................................... 6
SPECIFICATIONS...................................................... 7~9
INTERNAL VIEW ......................................................... 10
DISASSEMBLY PROCEDURES/分解手順 ......... 11~14
SELF DIAGNOSIS FUNCTION (DIAG)/
自己診断機能(ダイアグ)..................................... 15~41
AMP CHECK ................................................................ 42
DISPLAY DATA ..................................................... 43~44
IC DATA ................................................................. 45~53
BLOCK DIAGRAM ................................................. 54~55
PRINTED CIRCUIT BOARD .................................. 56~73
PIN CONNECTION DIAGRAM .................................... 74
SCHEMATIC DIAGRAM ........................................ 75~80
PARTS LIST ......................................................... 81~125
REMOTE CONTROL.......................................... 126~127
Parts List for Carbon Resistors .............................. 128
SERVICE MANUAL
AV RECEIVER/AV AMPLIFIER
RX-V3300/DSP-AZ2
RX-V3300/DSP-AZ2

Table of Contents

Other manuals for Yamaha DSP-AZ2

Questions and Answers:

Yamaha DSP-AZ2 Specifications

General IconGeneral
BrandYamaha
ModelDSP-AZ2
CategoryAmplifier
LanguageEnglish

Summary

To Service Personnel

Critical Component Handling

Information on special components and safety procedures for servicing.

Leakage Current Measurement

Procedure for verifying insulation and measuring leakage current after service.

Impedance Selector

Dimensions and Diagrams

Physical dimensions and layout diagrams of the impedance selector.

Front Panel Views

Rear Panel Views

Rear Panel Views (Continued)

Remote Control Diagram

Specifications

Audio Section Specifications

Detailed technical specifications for the audio performance.

Video Section Specifications

Technical specifications for video signal processing.

FM Tuner Specifications

Performance specifications for the FM radio tuner.

AM Tuner Specifications

Performance specifications for the AM radio tuner.

General Specifications

Power Supply and Consumption

Details on power requirements and usage.

Physical Dimensions and Weight

Specifications for the unit's size and mass.

Included Accessories

List of accessories provided with the product.

Menu Settings Overview

Speaker Setup Menu Options

Configuration options for speaker size, bass management, and mixing.

Audio Tuning and Test Controls

Settings for low-frequency test tones, tone control, and channel balance.

Input Renaming Function

Allows renaming of input sources for easier identification.

Input/Output Assignment and DSP Parameters

Signal Assignment and Mode Selection

Configuring I/O assignments and input modes.

Audio Parameter Adjustments

Settings for speaker delay, LFE level, dynamic range, and tone control.

DSP Parameter Details

Variable ranges for DSP parameters and 8ch stereo settings.

System Settings and Checks

Parameter initialization, display, and memory guard functions.

Internal View Diagrams

Disassembly Procedures

Top Cover Removal

Step-by-step instructions for removing the unit's top cover.

Front Panel Removal

Procedures for detaching and removing the front panel assembly.

Bottom Cover Removal

Instructions for removing the unit's bottom cover.

Disassembly Procedures (Continued)

DSP P.C.B. Removal

Steps to safely remove the Digital Signal Processor (DSP) circuit board.

Sub Chassis Removal

Procedures for detaching and removing the internal sub-chassis.

VIDEO (5) P.C.B. Removal

Steps for removing the VIDEO (5) circuit board.

Disassembly Procedures (Continued)

Removal of Multiple Video & Function PCBs

Instructions for removing various video and function circuit boards.

Printed Circuit Board (P.C.B.) Checking

Guidelines and precautions for inspecting printed circuit boards.

Disassembly Procedures (Continued)

MAIN (2) P.C.B. Removal

Steps for removing the MAIN (2) circuit board.

Power and Main (1) P.C.B. Removal

Instructions for removing power supply and MAIN (1) circuit boards.

Self Diagnosis Function (DIAG)

DIAG Menu and Sub-menu Overview

Lists available diagnostic menus and their sub-menus.

Specific Diagnostic Tests (YSS, SD, Decoder, HP, RAM)

Details on diagnostic tests for YSS, SD, Decoder, HP Route, and RAM.

Sound Mode and Speaker Configuration Tests

Diagnostic tests for Pro Logic, Neo:6, and Speaker Set options.

System and Component Diagnostic Tests

Tests for display, manual output, RS-232C, factory preset, AD data, and fan.

Self Diagnosis Function (DIAG) (Continued)

IF Status Diagnostics

Diagnostic menu for monitoring input function status.

DSP RAM Check

Diagnostic menu for verifying DSP RAM and bus connections.

SD DL Code Check

Diagnostic menu for checking SD DL code versions.

Soft SW Settings Check

Diagnostic menu for verifying software settings.

ROM Version/Check Sum/Port

Diagnostic menu for checking ROM version and checksum.

Starting and Canceling Diagnostic Mode

How to Start DIAG

Procedure to initiate the diagnostic mode by pressing specific keys.

Starting DIAG with Protection Cancelled

Method to start DIAG with protection functions disabled.

How to Cancel DIAG

Steps for properly exiting the diagnostic mode.

DIAG Mode Display Information

Diagnostic Menu Display

How the diagnostic menu is presented on the monitor screen.

Cause of Protection: Excessive Amplifier Current

Explanation of excessive current in the power amplifier causing protection.

Protection History Display Status

Visual indicators for whether protection history is present or absent.

Troubleshooting Protection Causes

Abnormal Power Supply Voltage Cause

Explanation of abnormal voltage in the power supply section.

Abnormal Power Amplifier DC Output Cause

Explanation of abnormal DC output from the power amplifier.

Excessive Heat Sink Temperature Cause

Explanation of issues related to excessive heat sink temperature.

DIAG Menu and Sub-menu Operation Procedures

DIAG Menu Selection Methods

Ways to select diagnostic menus using unit keys or remote.

Sub-menu Selection Methods

Ways to select sub-menus using unit keys or remote control.

Protection Function History Management

Display During DIAG Menu Operation

Additional Functions in DIAG Mode

Initial Settings for DIAG Mode

DIAG Menu Detailed Explanations

1. YSS938 Function Details

Detailed explanation of the YSS938 diagnostic function.

Analog Bypass Signal Path

Explanation of the signal flow for analog bypass.

YSS 0dB Output Characteristics

Details on YSS 0dB output levels and head margin.

YSS Full Bit Output Characteristics

Explanation of YSS full bit output behavior.

DIAG Menu Details (Continued)

YSS Full Bit Output Details

Details on YSS full bit output, including SWFR signal.

DSP Bypass Function Explanation

Explanation of the DSP bypass function and its signal path.

DIAG Menu Details (Continued)

2. YSS-SD Function Details

Detailed explanation of the YSS-SD diagnostic function.

YSS-SD Full Bit Output Details

Explanation of YSS-SD full bit output characteristics.

DIAG Menu Details (Continued)

3. SD-YSS Function Details

Detailed explanation of the SD-YSS diagnostic function.

SD-YSS Full Bit Output Details

Explanation of SD-YSS full bit output characteristics.

DIAG Menu Details (Continued)

4. Second Decoder Function Details

Detailed explanation of the second decoder diagnostic function.

SD Full Bit Output Details

Explanation of SD full bit output characteristics.

DIAG Menu Details (Continued)

5. HP Route Function Details

Detailed explanation of the HP ROUTE diagnostic function.

HP Full Bit Output Details

Explanation of HP full bit output characteristics.

DIAG Menu Details (Continued)

6. RAM Through Function Details

Detailed explanation of the RAM THROUGH diagnostic function.

Main Attenuation Settings

Explanation of main attenuation settings.

DIAG Menu Details (Continued)

7. Pro Logic / Neo:6 Function Details

Detailed explanation of Pro Logic and Neo:6 functions.

Pro Logic I Mode Operation

Explanation of the Pro Logic I mode operation.

Pro Logic II Mode Operation

Explanation of the Pro Logic II mode operation.

DIAG Menu Details (Continued)

Neo:6 Function Details

Detailed explanation of the Neo:6 function.

DIAG Menu Details (Continued)

8. Speaker Set Menu Options

Details on speaker settings and their analog switch configurations.

9. Effect Off / Display Check

10. Manual Test Procedures

11. RS-232C Communication Check

TxD/RxD Data Transmission Check

Checking test data transmission status for OK/NG.

12. Factory Preset Management

Preset Inhibit Function

Prevents RAM initialization, protecting user settings.

Preset Reserved Function

Reserves RAM initialization for the next power-on.

Preset Stations List

Hard Flow Check Procedure

13. AD Data Check / Fan Test

DC/PS Protection Detection Values

Displays protection detection values for DC and power supply voltage.

Temperature and Fan Status

Shows temperature detection and fan drive level.

REC-OUT Select Position

Impedance and Power Limit Detection

Panel Key Functionality (K0/K1)

Fan Drive Test Procedures

14. IF Status (Input Function Status)

IS1-2: Internal Status Information

Displays internal microprocessor status information.

IF Status Details

5th Byte: Signal Processing Status

Status information based on digital signal processing.

CS1-5: Channel Status Information

Channel status for IEC60958 input signals.

BY1-4: Dolby Digital Bitstream Information

Information about the bitstream in Dolby Digital signals.

BS1-5: DTS Bitstream Information

Information about the bitstream in DTS signals.

YS1-3: YSS938 Device Status

Device status information for the YSS938 IC.

SD: CS49329 Unsolicited Messages

Unsolicited messages from the CS49329.

MTT: Mute Trigger

Details on the mute trigger function.

Troubleshooting Protection Causes

Abnormal Power Supply Voltage Cause

Explanation of abnormal voltage in the power supply section.

Abnormal Power Amplifier DC Output Cause

Explanation of abnormal DC output from the power amplifier.

Excessive Heat Sink Temperature Cause

Explanation of issues related to excessive heat sink temperature.

Soft Switch Function Settings

SW Mode and Model Settings

Selecting SW mode and unit model configuration.

Tuner and Zone 2 Settings

Configuring tuner destination, existence, and Zone 2 availability.

RDS and Video Format Settings

Checking RDS presence and selecting video format.

18. Microprocessor Information

Version and Checksum Display

Displays microprocessor version, checksum, and port status.

Port Setting Verification

Verifying microprocessor port settings for function.

AAC Function Detection Port State

Status of AAC function detection ports.

Amplifier Check Procedures

Idling Current Confirmation Method

Procedure for confirming idling current under specific conditions.

Test Points for Amplifier Check

Display Data Details

Pin Connection Diagram

Pinout details for the display controller IC.

Grid Assignment Details

How grid segments are assigned to display elements.

Anode Connection Details

IC Data: MB87J0470 (DSP P.C.B.) DECODER

IC Data: MB87J0470 (Continued)

IC Data: MB87J0470 (Continued)

External Memory WAIT Mode

Explanation of external memory WAIT modes.

IC514: YSS938 (DSP P.C.B.) DSP

IC514: YSS938 (DSP P.C.B.) DSP (Continued)

IC514: YSS938 (DSP P.C.B.) DSP (Continued)

IC514: YSS938 (DSP P.C.B.) DSP (Continued)

IC520: M30805SGP (FUNCTION P.C.B.)

IC520: M30805SGP (Continued)

Key Input (A-D) Pull-up Resistance

Details on pull-up resistors for key inputs.

Block Diagram (1/2)

Block Diagram (2/2)

Printed Circuit Board (Foil Side) DSP P.C.B.

Printed Circuit Board (Foil Side) DSP P.C.B. (Continued)

Printed Circuit Board (Foil Side) FUNCTION P.C.B.

Printed Circuit Board (Foil Side) FUNCTION P.C.B. (Continued)

Printed Circuit Board (Foil Side) OPERATION (1) P.C.B.

Printed Circuit Board (Foil Side) OPERATION (6) P.C.B.

Foil side layout of the OPERATION (6) circuit board.

Printed Circuit Board (Foil Side) OPERATION (9) P.C.B.

Foil side layout of the OPERATION (9) circuit board.

Printed Circuit Board (Foil Side) OPERATION (10) P.C.B.

Foil side layout of the OPERATION (10) circuit board.

Printed Circuit Board (Foil Side) OPERATION (2) P.C.B.

Printed Circuit Board (Foil Side) OPERATION (3) P.C.B.

Foil side layout of the OPERATION (3) circuit board.

Printed Circuit Board (Foil Side) OPERATION (4) P.C.B.

Printed Circuit Board (Foil Side) OPERATION (5) P.C.B.

Foil side layout of the OPERATION (5) circuit board.

Printed Circuit Board (Foil Side) OPERATION (6) P.C.B.

Printed Circuit Board (Foil Side) OPERATION (7) P.C.B.

Foil side layout of the OPERATION (7) circuit board.

Printed Circuit Board (Foil Side) OPERATION (8) P.C.B.

Foil side layout of the OPERATION (8) circuit board.

Printed Circuit Board (Foil Side) OPERATION (9) P.C.B.

Foil side layout of the OPERATION (9) circuit board.

Printed Circuit Board (Foil Side) VIDEO (1) P.C.B.

Printed Circuit Board (Foil Side) VIDEO (5) P.C.B.

Foil side layout of the VIDEO (5) circuit board.

Printed Circuit Board (Foil Side) VIDEO (2) P.C.B.

Printed Circuit Board (Foil Side) VIDEO (4) P.C.B.

Foil side layout of the VIDEO (4) circuit board.

Printed Circuit Board (Foil Side) VIDEO (5) P.C.B.

Printed Circuit Board (Foil Side) VIDEO (6) P.C.B.

Printed Circuit Board (Foil Side) VIDEO (7) P.C.B.

Foil side layout of the VIDEO (7) circuit board.

Printed Circuit Board (Foil Side) VIDEO (8) P.C.B.

Foil side layout of the VIDEO (8) circuit board.

Printed Circuit Board (Foil Side) Main PCBs

MAIN (1) & MAIN (3) PCBs

Foil side layout of MAIN (1) and MAIN (3) circuit boards.

MAIN (4) & MAIN (5) PCBs

Foil side layout of MAIN (4) and MAIN (5) circuit boards.

MAIN (6) & MAIN (7) PCBs

Foil side layout of MAIN (6) and MAIN (7) circuit boards.

Printed Circuit Board (Foil Side) POWER (1) P.C.B.

Printed Circuit Board (Foil Side) POWER (2) P.C.B.

Foil side layout of the POWER (2) circuit board.

Printed Circuit Board (Foil Side) POWER (3) P.C.B.

Foil side layout of the POWER (3) circuit board.

Printed Circuit Board (Foil Side) POWER (4) P.C.B.

Foil side layout of the POWER (4) circuit board.

Printed Circuit Board (Foil Side) POWER (5) P.C.B.

Foil side layout of the POWER (5) circuit board.

Printed Circuit Board (Foil Side) MAIN (4) P.C.B.

Printed Circuit Board (Foil Side) MAIN (5) P.C.B.

Foil side layout of the MAIN (5) circuit board.

Printed Circuit Board (Foil Side) MAIN (6) P.C.B.

Foil side layout of the MAIN (6) circuit board.

Printed Circuit Board (Foil Side) MAIN (7) P.C.B.

Foil side layout of the MAIN (7) circuit board.

Printed Circuit Board (Foil Side) POWER (1) P.C.B.

Printed Circuit Board (Foil Side) POWER (2) P.C.B.

Printed Circuit Board (Foil Side) POWER (3) P.C.B.

Printed Circuit Board (Foil Side) POWER (4) P.C.B.

Foil side layout of the POWER (4) circuit board.

Printed Circuit Board (Foil Side) POWER (5) P.C.B.

Foil side layout of the POWER (5) circuit board.

Component Pin Connection Diagrams

Integrated Circuit (IC) Pinouts

Pinout diagrams for various integrated circuits used in the unit.

Diode Types and Diagrams

Diagrams and identification of diodes used.

Transistor Types and Diagrams

Diagrams and identification of transistors used.

Schematic Diagram: DSP Section

Schematic Diagram: Function Section

Schematic Diagram: Operation Sections

Schematic Diagram: Video Section

Schematic Diagram: Main Amplifier Sections

Schematic Diagram: Power Supply Section

Parts List

Electrical Parts

List of electrical components like capacitors, resistors, and connectors.

DSP PCB Parts

List of components for the DSP printed circuit board.

MAIN PCB Parts

List of parts for the MAIN printed circuit board.

POWER PCB Parts

List of parts for the POWER printed circuit board.

FUNCTION PCB Parts

List of parts for the FUNCTION printed circuit board.

OPERATION PCB Parts

List of parts for the OPERATION printed circuit board.

VIDEO PCB Parts

List of parts for the VIDEO printed circuit board.

Chip Resistors

List of chip resistors with specifications.

Carbon Resistors List

List of carbon resistors with part numbers and values.

Exploded View Diagram

Mechanical Parts List

Front Panel & Sub Chassis Unit Parts

Front Panel & Sub Chassis Unit Parts (Continued)

Heatsink Unit Diagrams

Left Heatsink Unit

Diagram of the left heatsink unit assembly.

Right Heatsink Unit

Diagram of the right heatsink unit assembly.

Heatsink Unit Parts (Continued)

Remote Control RAV226 Schematic

Remote Control Initial Code Settings

Initial Macro Setup Codes

Table of initial macro setup codes for remote control programming.

Parts List: Carbon Resistors

Related product manuals