7 System Diagnosis
7.3 Input/Output Status
7-8
7.3.6 Signal Number Search
A search can be made for a signal number of a universal input, universal
output, specific input, and specific output.
A search for the signal number can be made in the following two ways.
• Direct search on the UNIVERSAL/SPECIFIED INPUT/OUTPUT win-
dow
• Search from the menu
7.3.6.1 Direct Search on the Universal/Specified Input/Output Window
1. Move the cursor to a signal number in the UNIVERSAL/SPECIFIED
INPUT/OUTPUT window, and press [SELECT].
– Numeric values can now be entered.
2. Enter the signal number to be searched.
– Type the signal number in the number input line.
Signal
number
To Next Page
Loading...
